EasyManua.ls Logo

Xexun TK102 - 5 Usage; SIM Card Installation; Battery and Charger; Quick Startup

Xexun TK102
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on , and PIN code off. The
SMS message must in Text format, cant be identified for PDU format.
Steps:
1 Open the rear cover, and pick out the battery.
2 Push the foil along and turn it left.
3 Put the SIM card into the holder, and turn the foil right and fasten it in place.
5.2 Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and
charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full
battery will support around 48 hours use on end. After first use, the battery can be
charged fully in 3-5hours.
Cautions:
a: For its Li-ion battery, which contains harmful chemicals and may burst, please don t
bump, puncture it violently and keep it off fire.
b: Please charge the battery in time to keep it working normally.
5.3 Startup
l Put the SIM card and battery in place.
l Turn on the unit outdoors by pressing the on/off button until the indicator is on.
l For first use, please initialize the unit and restore it to default setting.( please refer to
PDF 文件使用 "pdfFactory Pro" 试用版本创建 ÿ www.fineprint.cn

Other manuals for Xexun TK102

Related product manuals