9
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movement within a district. The unit will
send message to the authorized numbers when it moves out of the district.
Notes: This function will be invalid if the unit moves outside the district. You need to
re-set it if you want this function again.
5.11.1 Send SMS stockade+password+space+latitude,longitude;latitude,longitude to
the unit to set the restricted district.
Remark: The first latitude&longitude is coordinate of the top left corner of the
Geo-fence, while the second latitude&longitude is the coordinate of the bottom right
corner. It will alarm one time in each setting.
5.11.2 Cancel: Send SMS nostockade+password to deactivate this function.
5.11.3 Response SMS format: stockade!+geo-info to the authorized numbers. It will
alarm one time in each setting.
5.12 Movement Alert
This function is using for the owner to get alarm when the tracker
moves
out
of
a
restricted
district.
5.12.1 Set up:
Send
SMS
move+password
to
the
unit
to
set
the
movement
alert.
then the
unit will reply “move ok!”. In case of such a movement, it will send SMS “Move” along
with a Geo-info to the authorized numbers. It will alarm one time in each setting.
5.12.2 Cancel: Send SMS nomove+password to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.
Response
SMS
format:
move!+geo-info.
It
will
alarm
one
time
in
each setting.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
To Next Page
Loading...
