Xiaomi Mi Drone mini - Installing and Disassembling; Installing and Disassembling the Battery

Baery Release
Installing and Disassembling
1. Installing and Disassembling the Baery
Installing: Place the baery inside the drone’s baery compartment and ensure that the
arrow on the cartridge is pointing in the same direction as the baery release. Press the
baery into place, making sure that both ends are firmly and tightly in place. There will be
a clicking sound as the baery is properly set into place.
Disassembling: Press down on the baery release buon until the baery turns upwards.
Remove the baery.
Note: Ensure that you disconnect the device from any power sources and take out the baery
if you are not going to use it for an extended period of time.