04
Due to the connection characteristics of the Bluetooth signal, in dense
environments with 2.4 GHz electromagnetic signal interferences, there
may be occasional disconnects or no sound.
Clearing connection history
① Place the le and the right earphone into the charging case.
② Simultaneously press and hold the touch areas of the le and the
right earphones for seven seconds, then release the touch areas once
the indicators of the earphones light up in white.
③ The earphones have been reset and the connection history has
been cleared. The indicators of the earphones blink white, and the
earphones are waiting for a connection.
Function Overview
● Incoming calls
Gently tap either one of the
earphones twice: Answer/End calls
● Music and voice assistant
While wearing both earphones:
Gently tap the right (R) earphone
twice: Play/Pause music
Gently tap the le (L) earphone
twice: Access the voice assistant
Taking out an earphone: Pause
music
While wearing one earphone:
Gently tap the earphone twice:
Play/Pause music
Notes:
① The voice assistant function can be used only if your device
supports it, and this function needs to be granted permission on
the device.
② When only using the le earphone, place the right earphone into
the charging case and close the lid.
To Next Page
Loading...
Need help?
General
