04 05
4 Charge Your Scooter
5 How To Ride
Wear helmets and knee pads in case
of falls and injuries when you learn to
ride the scooter
Lift up the rubber flap
Plug the power
adapter into the
charging port
When charging is
completed, put back
the rubber flap
Turn on the scooter, and
check the power indicator
1.
3 Assembly and Set-Up
3. Tighten the screws onto both sides of
the stem with the hexagon wrench
4. After the assembly, press the power
button to check if it's working properly
2. Attach the handlebar to the stem
1. Fasten the handlebar stem on the headset,
and put the kickstand down
To Next Page
Loading...
