Do you have a question about the Xiaomi Router AX3200 and is the answer not in the manual?
Product type | Tabletop router |
---|---|
Product color | Black |
LED indicators | LAN, Power |
Antennas quantity | 6 |
Internal memory | 256 MB |
Processor cores | 2 |
Processor model | Filogic800 |
Built-in processor | Yes |
Processor frequency | 1350 MHz |
Processor architecture | ARM Cortex-A53 |
Processor manufacturer | MediaTek |
Modulation | BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK |
Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
Top Wi-Fi standard | Wi-Fi 6 (802.11ax) |
WLAN data transfer rate (max) | 1000 Mbit/s |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 90 % |
Operating relative humidity (H-H) | 10 - 90 % |
Cables included | LAN (RJ-45) |
Mobile operating systems supported | Android, iOS |
Security algorithms | WPA-PSK, WPA2-PSK, WPA3-SAE |
DSL WAN | - |
Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
Ethernet LAN interface type | Gigabit Ethernet |
Power source type | AC |
Harmonized System (HS) code | 85176990 |
Depth | 186 mm |
---|---|
Width | 284 mm |
Connect the router's WAN port to the broadband modem using the network cable.
Connect to the router's Wi-Fi and follow on-screen instructions for setup.
Use the Mi Home app for router management and pairing with your Mi account.
Add mesh network devices via the Mi Home app to configure wireless networking.
Reset satellite router and pair wirelessly with the main router by pressing the Mesh button.
Reset satellite router and connect it via network cable to the main router's LAN port.
Explains the status lights for the Internet connection, including no cable, error, and normal operation.
Explains the status lights for the system: off, updating, starting up, error, and working normally.
Steps to fix problems with accessing the internet after router configuration.
Guidance for forgotten management passwords and how to reset the router to factory settings.