Xinje ZG3 Series - Page 47

SD1104
Low 16 bits of accumulated pulse
number(the unit is pulse equivalent)
SD1105
High 16 bits of accumulated pulse
number(the unit is pulse equivalent)
SD1106
Low 16 bits of current output
frequency(the unit is pulse number)
SD1107
High 16 bits of current output
frequency(the unit is pulse number)
SD1108
Low 16 bits of current output
frequency(the unit is pulse equivalent)
SD1109
High 16 bits of current output
frequency(the unit is pulse equivalent)
SD1110
Wrong Pulse message
1: Pulse data block error
2:Equivalent mode: pulse
amount/turn, amount/ turn of
movement is 0
3:Code of system parameters block
error
4:Pulse data block exceeds max limit
10:Zero return do not set near point
signal
11:Speed of zero return is 0
12:Crawling speed of zero return is
0
13 Direction of zero return speed and
zero auxiliary speed
SD1111
Code of error pulse block
SD1120
Current segment(No. n segment)
PULSE_7
SD1122
Low 16 bits of accumulated pulse
number (the unit is pulse number)
SD1123
High 16 bits of accumulated pulse
number (the unit is pulse number)
SD1124
Low 16 bits of accumulated pulse
number(the unit is pulse equivalent)
SD1125
High 16 bits of accumulated pulse
number(the unit is pulse equivalent)
SD1126
Low 16 bits of current output
frequency(the unit is pulse number)
SD1127
High 16 bits of current output
frequency(the unit is pulse number)