Xinje ZG3 Series - Communication Settings

1：loop
SFD332
CAM function
bit0 corresponds to HSC0， bit1corresponds to
HSC2，and so on, bit9 corresponds to HSC18
0：do not support CAM function
1：support CAM function
Expansion Module Configuration
ID
Function
Description
SFD350
Configuration of the first
expansion module
：
SFD359
SFD360
Configuration of the second
expansion module
：
SFD369
：
：
：
SFD500
Configuration of the 16th
expansion module
：
SFD509
SFD510
Configuration 1 of BD
module
：
SFD519
：
：
：
SFD550
Configuration 5 of BD
module
:
SFD559
Communication
ID
Function
Description
Note
COM 1
SFD600*
Communication mode
Refer to the value meaning of
corresponding bit
SFD601*
Communication format
Baud rate, data bit,
stop bit, parity
Refer to the value meaning of
corresponding bit
SFD602*
Judgment time of frame
timeout
In characters
High 8 bits invalid
SFD603*
Judgment time of reply
timeout
High 8 bits invalid
SFD604
Waiting time before
sending
Unit ms