Flight environment requirements
1. Before every flight, check the local airspace legislation and policies regarding remote controlled aircrafts
and follow these at all times.
2. Ensure to fly outside a radius of 3 km of any airport control zone (CTR) or governmental buildings.
3. Always fly in open areas and keep a minimum distance from people, animals and/or buildings. Do not fly
directly over people or animals.
4. Avoid flying in areas that may cause magnetic interference, such as: power lines, tall buildings, shopping
malls, residential areas or mines to avoid malfunctioning of the magnetic compass in your Xplorer.
5. Fly below heights of 4000 meter above sea level to avoid problems with the ascending power in your Xplorer.
6. Check your local UAV weather forecast for information on atmospheric factors that can interfere with
controlling your Xplorer. Factors like GPS availability and solar flares can cause unexpected behaviour of
your Xplorer. Fly your Xplorer only with a wind force 4 or below and stay out of weather conditions like rain,
snow or fog.
Check and Preparation
Smart flight battery
Smart flight battery
Charging kit
Smart flight battery and Charging kit
Charging kit
Connecting your XIRO App:
XIRO App interface
Flight mode: Attitude flight mode / GPS flight mode / Visual positioning mode / IOC mode / One-key
return home
Enable Wi-Fi on your mobile device, search for the available Wi-Fi networks and then select the network
named "XPLORER_XXXXXX" from your Wi-Fi network list. When requested for a password, enter the
default password: XIRO1234. The Xplorer and the XIRO App are now connected. (New users, please
register first.)
Charging port
Power output port
Power check button
Power indicators
Communication port
Adapter
Charger
DC port
Charging indicator
Battery lock
Distance
Altitude Speed Connected satellites
Remaining storage Transmission signal
Xplorer power level
Visual positioning mode GPS flight mode Attitude flight mode Takeoff mode Landing mode
To Next Page
Loading...
Need help?
General
