Need help?Do you have a question about the Xirrus XR-600 Series and is the answer not in the manual?
General| Manufacturer | Xirrus |
|---|---|
| Mounting | Ceiling, Wall |
| Security Features | WPA, WPA2, 802.1X |
| Management | Command Line Interface (CLI) |
| Certifications | FCC, CE, RoHS |
Lists essential hardware, cables, and accessories needed for the XR-600 installation process.
Guidelines for selecting a suitable and safe placement for the XR-600 AP, considering user density and RF noise.
Instructions for directly attaching the XR-600 to a ceiling or suspended grid without a mounting plate.
Steps for installing the XR-600 on a suspended ceiling grid using a mounting plate and T-bar clips.
Procedure for mounting the XR-600 to a ceiling using a dedicated mounting plate and screws.
Guide for securing the XR-600 to a wall using the provided wall mounting bracket and screws.
Details on connecting the GIGABIT1/PoE+ port for power/data and the optional GIGABIT2 port.
Explanation of using XMS Cloud and XMS Enterprise for automated device setup and ongoing management.
Procedure for performing a factory default reset on the XR-600 AP using its reset button.
Technical drawings illustrating the dimensions and design of the XR-600 and wall mounting brackets.
A template diagram showing hole placements for direct mounting the XR-600 AP to a surface.
Key physical dimensions, weight, and environmental operating conditions for the XR-600.
To Next Page