3
5) Please do not close the lift while the projector is running or while it is in “cool
down” operation to avoid premature failure to electrical or electronic
components.
6) Please do not step on the lift. Overloading could lead to damage of equipment
or injury.
ELECTRICAL RISK:
1) Please check the standard of the local power supply before installation and
ensure that the operation voltage of the motor is related as the local power
supply. The motor may damage due to incorrect voltage supply.
2) Never operate the lift with damaged or faulty cord or plug.
3) Please keep the cord away from heated surface.
4) Please turn off power supply or unplug before cleaning or servicing.
THE SCISSOR LIFT
Overview
The lift is powered by a tubular motor which is operated on Single phase 230~240 V
ACwith the convenience of a remote setting controller with 3 programmable positions,
at the ceiling or store level, projection level and maintenance level. It provides an
attractive solution to recess a projector in ceiling and it can be fully extended to reach
ground level for maintenance.
The lift is shipped with the carton box and the following items are allocated. Please
inspect them for any damages once after received the lift.
1) The scissor lift
2) Remote Control
3) Lower ceiling cover
4) User Manual
5) A package of screws for projector
To Next Page
Loading...
Need help?
General