15
EN
Thema:
Switch the frequency bands
Press the BND button on the front
panel to switch the frequency bands
between FM1, FM2 and FM3.
Radio mode on
To get to Radio mode press the ?/SRC
button several times till you see the
prompt "Radio " on the display.
Automatic station searching
Press the 8 or 7 button to start the
searching into corresponding direction
on the frequency scale.
Manual station searching
Keep pressed the 8 or 7 button
for ca. 2 seconds to switch to manual
station searching mode.
Now using the 8 and 7 buttons you
can search for radio stations stepwise
into corresponding direction on the
frequency scale.
After ca. 5 seconds of inactivity the
unit switchs back to automatic station
searching mode.
Store the found stations
There are 6 memory cells per FM
frequency band.
To store the current radio station keep
pressed the corresponding button (1-6)
on the front panel for ca. 2 seconds.
On the screen appears the number of
the used memory cell where the station
was stored.
Radio mode
To Next Page
Loading...
Need help?
General
