Xomax XM-D749 - Installation Guide; Pre-Installation Steps; Head Unit Mounting Procedure

Copyright Notes:
This product incorporates copyright protecon technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporaon and other rights owners.
Use of this copyright protecon technology must be authorized by Macrovision
Corporaon, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporaon. Reverse engineering or
disassembly is prohibited.
Region Management informaon:
This product iis designed and manufactured to respond to the Region Management
Informaon that is recorded on a digital video disc. If the Region number described
on the digital video disc does not correspond to the Region number of this DVD
player. the disc cannot be played on by this DVD player.
INSTALLATION:
• Before Installaon:
- We recommend you to let a professional technician install the unit in vehicle.
- Disconnect negave baery terminal of vehicle.
- Revome the trim ring from unit (if installed).
• Mounng the Head Unit:
- Carefully remove the exisng head unit.
- Before finally installing this product, connect wiring harness temporarily and
make sure it’s all connected up properly and test the head unit if it can work
properly. (Consult a qualified technician if you unsure)
- Insert the mounng sleeve into the installaon dashboard.
- Bend mulple mounng tabs around the mounng sleeve unl the mounng
sleeve is secure.
- Connect all wiring harnesses and slide the head unit into the mounng sleeve
unl it clicks into place.
- To fix this DVD player onto the rear part of the chassis using the mounng
sleeve, metal strap, hex bolt and screws to the vehicle.
Note: if you need other screws to fix other terminal, please buy from your dealer
according to the drilling of holes size.