Why is my Xoro TV Receiver remote control not working?
If the Xoro TV Receiver remote control isn't working, first replace the batteries. If that doesn't solve the problem, make sure you are within 5 meters of the receiver and within a 30° angle. Also, check whether bright light is interfering with the sensor.
How to fix no sound on Xoro HRT 8300?
If there is no sound from your Xoro TV Receiver, first, ensure that the Mute function is off by pressing the MUTE button. Then, increase the volume by pressing the VOL+ button. Verify the connection to the TV set or amplifier.
What to do if my Xoro TV Receiver has no DVB-T reception?
If you're experiencing no DVB-T reception or serious distortion with your Xoro TV Receiver, try these steps: First, adjust the antenna. If that doesn't work, turn on the power supply for the antenna. You might also retry the Auto Scan or consider buying a more powerful antenna.
What to do if my Xoro TV Receiver has no picture?
If your Xoro TV Receiver shows no picture or the picture isn't colorful, check the connection to the TV set. Also, check the setting in video output.
Why is my Xoro TV Receiver not recording?
If your Xoro TV Receiver is not recording, it may be because no USB memory is connected, there's no free space on the storage, or the USB storage is too slow.
How to stop Xoro HRT 8300 TV Receiver from recording early?
To stop the Xoro TV Receiver from recording before you press the Record button, set the “Timeshift Record” function to “off”.
General| Recording Function | Yes |
|---|---|
| Video Formats | MPEG-2, MPEG-4, H.264 |
| Video Resolution | 1080p |
| HDMI Output | Yes |
| Weight | 0.8 kg |
| Tuner Type | DVB-T2 |
| Video Output | HDMI |
| Audio Output | HDMI, Optical, RCA |
| USB Ports | 1 |
| Audio Formats | AAC |
| Connectors | HDMI, USB, Ethernet, CI Slot |
| Features | EPG |
| USB Port | Yes |
Safe operational procedures and guidelines for the device.
Proper disposal of electrical and electronic equipment for recycling.
Information on returning and disposing of used batteries.
Default configuration settings for OSD language, aspect ratio, and video output.
Description of controls and indicators on the front panel.
Identification of ports and connectors on the rear panel.
Instructions for inserting batteries and operating the remote control.
Diagram and instructions for connecting the receiver to a TV and antenna.
Select the geographical location for receiver setup.
Choose the preferred language for the on-screen display.
Set the video resolution output for your TV.
Configure the screen aspect ratio (e.g., 16:9, 4:3).
Methods for changing channels and accessing the program list.
Selecting audio tracks and languages for programs.
Accessing and viewing teletext and videotext information.
Adjusting audio output levels and muting sound.
Changing video output resolution via HDMI/YPbPr.
Defining and organizing favorite channel groups.
To Next Page
