© XPAND, All Rights Reserved. 7 www.xpand.me
Set Your Glasses to Operate in 3D Mode
Set your 3D device to 3D DLP-Link™ mode and turn on the
glasses. When the glasses are in range of your 3D device,
they will automatically start to operate in 3D mode.
Battery low indication
If LED light (2) and shutters flash at power on, battery level
is low. Glasses will continue to operate normally until the
battery is completely discharged.
Battery Replacement
» Step 1: Open battery compartment
» Step 2: Take out the battery
» Step 3: Insert new battery
» Step 4: Close the battery compartment
To Next Page
Loading...
