© XPAND, All Rights Reserved. 8 www.xpand.me
Troubleshooting
The glasses don’t work: Make sure that the glasses are
turned on. If problems persist try to turn the ambient lights
off or shade the windows if intensive sunlight is present.
Make sure that your 3D device is set to 3D DLP-Link™
mode. Get closer to the screen. Range of the glasses
strongly depends on the used 3D device and/or projection
screen.
Attention – Consult Accompanying
Documentation
Important Safety Instructions
! Read these instructions.
! Keep these instructions.
! Heed all warnings.
! Follow all instructions.
! Do not use this apparatus near water.
! Clean only with dry cloth.
! Only use the attachments/accessories included
Battery
Replace Battery With Type CR2032 Only. Use of Another
Battery May Present A Risk Of Fire Or Explosion.
To Next Page
Loading...
Need help?
General
