Xplore DT4100 - Powering the Device on and off; Suspending the Device

11
Powering the Device On and Off
Powering on the Device
Press and hold the Power key for 3 seconds until the LED indicates aqua
blue.
Note: The device can only power on when the battery cover is closed.
Powering off the Device
Press and hold the Power key for 3 seconds, and follow the screen
instructions to power off the device.
Suspending the Device
If the device is on, press the Power key once or close the ip cover to
suspend the device (i.e. entering sleep mode), saving battery power.
To resume operation from sleep mode, press the Power key once or
open the ip cover.
Note: The device will always maintain the WLAN connection even after
entering the sleep mode.
Getting Started