Xplore DT4100 - Defining Keys; Changing Battery Charging Policy

14
2. Select UHD Player.
3. Browse to a picture, and then click SET WALLPAPER.
Adjusting Screen timeout & Screen dim timeout
1. Select Application drawer > Settings > Display
2. Adjust the timeout period for the following options:
Sleep: Adjust the idle period before the device enters sleep mode.
Sleep in charging: Adjust the idle period before the device enters
sleep mode while charging.
Screen dim timeout: Adjust the screen dim period before the
screen turns off.
Adjusting Flip Cover Setting
By default, the screen is turned off when closing the ip cover. To change
the setting, select Application drawer > Settings > Display > Flip cover.
Hiding System Bars
To hide the status bar and navigation bar:
1. Select Application drawer > Settings > Display > System bars.
2. Select the required options for Admin and User mode display.
Dening Keys
The Left side key and Right side key are set as Menu key and Back key
by default. To change the key denition:
1. Select Application drawer > Settings > Key.
2. In Left side key and Right side key menu, select Function select
to change the key denition.
Changing Battery Charging Policy
By default, smart charging mechanism is enabled to charge the battery
only when the battery level is lower than 80%. To adjust the charging
trigger level:
1. Select Application drawer > Settings > Battery.
Using the Device