Xplore DT4100 - Changing Language; Performing System Backup; Performing System Restore

15
2. Select Smart charging > Smart charging settings.
3. Drag the slide bar to adjust the charging trigger level, and then click
OK.
Changing Language
1. Select Application drawer > Settings > Language & input >
Language.
2. Select a language.
Performing System Backup
To perform system backup:
1. Select Application drawer > System Backup.
2. Select the Backup button.
3. Backup path is the backup image name. Edit the path if needed.
4. Select Internal storage or SD card for the Backup Location.
5. Select a backup data option from Backup selection:
OS: Backup OS only.
DATA: Backup installed applications, settings, and data.
OS+DATA: Backup OS, installed applications, settings, and data.
6. To restore the backup image only on the current device, check the
Need to match serial no. checkbox.
7. Click Start, and then click OK when prompted.
8. The device reboots automatically upon completing the backup.
Note:
• Close all active programs before performing backup or restore.
• The device saves the backup image in the folder named backup.
Performing System Restore
To restore the system from a backup image:
1. Select Application drawer > System Backup.
Using the Device