38
903310
SFH M3x10
902320
SH M3x20
303126
SHIM 3x6x5
901305
SB M3x5
903308
SFH M3x8
7. FINAL ASSEMBLY
Double-sided Tape
HUDY #107875
(NOT INCLUDED)
Receiver
(NOT INCLUDED)
Speed Controller
(NOT INCLUDED)
Feed the receiver wire
into the antenna tube
NOTE: If the antenna tube does not hold the antenna properly, apply a small
drop of the CA glue to the outside end of the antenna tube while inserting it into
the holder. Make sure not to apply glue to the inside of the antenna tube, or the
antenna wire may get permanently stuck.
CA
5mm
#306551
XRAY PURE TUNGSTEN
CHASSIS WEIGHT 11g
NOTE ORIENTATION
To ensure correct functioning of the battery
holder, do not overtighten the screw; the holder
must be able to move
HEIGHT ADJUSTMENT
1 turn = 0.5mm
To Next Page
Loading...
