19
902306
SH M3x6
902308
SH M3x8
CHASSIS FLEX SETTING
TOP DECK SETTING
930306
BB 3x6x2.5
May be used when the front
belt becomes worn and
loose. Belt tensioner is NOT
included in the kit and must
be purchased separately.
#303071
BELT TENSIONER SET
Post is not connected to the top deck.
This allows maximum flex setting
and provides maximum steering
characteristics. However, the car is
less stable on-power.
Post is connected to the top deck
via ball bearing. This allows the top
deck to flex to the sides but not to the
front/rear. This setting eliminates a
bit of steering but improves stability.
The new feature of the top deck is the flex setting adjustment.
There are three different flex setting alternatives.
Post is connected to the top deck
via aluminum bushing. This setting
provides maximum stability as it
stiffens the entire car and eliminates
flex to sides and front/rear.
TOP DECK FLEX SETTINGS
3x6mm
3x6mm
3x8mm
MEDIUM
STIFF
INITIAL SETTING
We recommend using optional 1.6mm top deck for super-low traction conditions or in combination with
aluminum chassis as it provides more overall traction and steering.
#301061
T4’20 GRAPHITE TOP DECK 1.6MM
4. STEERING
SOFT MEDIUM STIFF
To Next Page
Loading...
