Xray T4 - HUDY ALU SERVO HORNS; HUDY CLAMP ALU SERVO HORNS

18
303129
SHIM 3x6x2
303126-K
SHIM 3x6x5
902305
SH M3x5
903306
SFH M3x6
2+2mm
5mm
10mm THREAD
10mm THREAD
HUDY ALU SERVO HORNS
#293501 KO, Sanwa - 23T
#293502 Hitec - 24T
#293503 Futaba - 25T
HUDY CLAMP ALU SERVO HORNS
#293407 KO, Sanwa - 23T
#293408 Hitec - 24T
#293409 Futaba - 25T
ALU SERVO HORNS - OFFSET
#293491 KO, Sanwa - 23T
#293492 Hitec - 24T
#293493 Futaba - 25T
CLAMP ALU SERVO HORNS - OFFSET
#293401 KO, Sanwa - 23T
#293402 Hitec - 24T
#293403 Futaba - 25T
For more in-corner steering and better steering response, aluminum servo horns may be used.
IMPORTANT!
When than aluminum horn is used, the steering servo saver is not used. This increases the risk of breaking the servo in serious crashes.
HUDY ALU SERVO HORNS
#293497 KO, Sanwa - 23T
#293498 Hitec - 24T
#293499 Futaba - 25T
HUDY CLAMP ALU SERVO HORNS
#293404 KO, Sanwa - 23T
#293405 Hitec - 24T
#293406 Futaba - 25T
INITIAL SETTING
H = (24T) Hitec
F = (25T) Futaba, Robe, Savox
K = (23T) KO, JR, Airtronics, Sanwa
4. STEERING
When using optional aluminum steering arms,
we suggest using optional shims #303134-K
(3x7.5x1.5mm) + #303123-K (3x6x2mm)
when you want to eliminate steering lock in
high-traction conditions.
3x6x2mm
3x7.5x1.5mm
3x7.5x1.5mm