36
903308
SFH M3x8
7. FINAL ASSEMBLY
Double-sided Tape
HUDY #107875
(NOT INCLUDED)
Receiver
(NOT INCLUDED)
Speed Controller
(NOT INCLUDED)
Feed the receiver wire
into the antenna tube
NOTE: If the antenna tube does not hold the antenna properly, apply a small
drop of the CA glue to the outside end of the antenna tube while inserting it into
the holder. Make sure not to apply glue to the inside of the antenna tube, or the
antenna wire may get permanently stuck.
CA
#306191
T4 GRAPHITE + ALU FULLY
ADJUSTABLE BATTERY HOLDER
#306186
ALU LIPO BATTERY BACKSTOPS (F+R)
#306194
T4 GRAPHITE + BRASS FULLY
ADJUSTABLE BATTERY HOLDER
3mm
3mm
The thickness of the shim may be
changed depending on the position
of the batteries you want to use.
306219
SHIM 3x6x3
903310
SFH M3x10
903306
SFH M3x6
#306195
ALU FULLY ADJ. BATTERY HOLDER
+ WEIGHT FOR SHORTY BATTERIES
#306551
XRAY PURE TUNGSTEN
CHASSIS WEIGHT 11g
To Next Page
Loading...
