55
903312
SFH M3x12
960030
N M3
XB8E12. FINAL ASSEMBLY
➍
Before cutting and making holes on the body, put the unpainted body on the chassis to confirm the
mounting position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry thoroughly.
Mask all windows.
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
➊
➋
➌
➎
➏
➐
➑
Body Reamer (HUDY #107600)
DETAIL
To reinforce the body or to fix broken
body use #106280 HUDY BODY FIX
#359712
BODY HIGH-SPEED - LIGHTWEIGHT
Ensure to make this rear body mount
hole oval so in the case of chassis flex
after a big jump the body mount will
not tear up the hole.
To tighten the setscrew you can also use the
HUDY 17mm Wheel Nut Tool #107570
WHEEL NUTS
#355261 OPEN INCLUDED
#293560 COVERED OPTION
#355265 COVERED OPTION
XRAY STARBURST WHEELS
#359808 Pink OPTION
#359809 Yellow OPTION
WINGS
#353513-K BLACK INCLUDED
#353513 WHITE OPTION
#353513-Y YELLOW OPTION
#353512 LEXAN
®
OPTION
WING SHIMS
#353565 COMPOSITE INCLUDED
#293561 ALU OPTION
#293561-O ALU OPTION
#353561 ALU OPTION
DETAIL
To Next Page
Loading...
Need help?
General
