65
SHOCK ABSORBERS
903312
SFH M3x12
960030
N M3
XT8E
960030
N M3
902319
SH M3x18
LEFT thread
902318
M3x18
12. FINAL ASSEMBLY
REAR SHOCKS (LONG)
On the rear left arm use the SILVER M3x18
screw - this screw has LEFT THREAD.
Use STANDARD
M3x18 screw
M3x18mm
NOTE ORIENTATION
SHORTER
LONGER
L=R
2x
INITIAL SETTING
DETAIL
L=R
BOOK
SET-UP
DETAIL
L=R
INITIAL SETTING
➍
Before cutting and making holes on the body, put the unpainted body on the chassis to confirm the
mounting position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry thoroughly.
Mask all windows.
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
➊
➋
➌
➎
➏
➐
➑
To reinforce the body or to fix broken
body use #106280 HUDY BODY FIX.
DETAIL
Ensure to make this rear body
mount hole oval so in the case of
chassis flex after a big jump the
body mount will not tear up the
hole.
To tighten the setscrew you can also use the
HUDY 17mm Wheel Nut Tool #107570.
WING SHIMS
#353565 COMPOSITE INCLUDED
#293561 ALU OPTION
#293561-O ALU OPTION
#353561 ALU OPTION
WHEEL NUTS
#355261 OPEN INCLUDED
#293560 COVERED OPTION
#355265 COVERED OPTION
NOTE
ORIENTATION
DETAIL
Body Reamer (HUDY #107602)
WINGS
#353513-K BLACK INCLUDED
#353513 WHITE OPTION
#353513-Y YELLOW OPTION
#353512 LEXAN
®
OPTION
To Next Page
Loading...
Need help?
General
