xsto SCL170A - Operation; Loading Goods

27
6 Operation
WARNING------ Only trained person can operate this machine!
WARNING------ Overloading is strictly prohibited!
WARNING------ When using, keep anybody and any item off the
front of the SCL170A and make sure nothing is under the loading plate
to avoid any injury and property loss caused by loads falling or
machine tipping.
6.1 Loading Goods
Before loading, move up the pin at the
support leg, and the support leg can rotate.
When the support leg rotates to the
approximate horizontal position, the pin will
automatically return to its position and lock
the support leg again. When the support
leg is not used to support the goods, the
pin is also moved upward. When the leg is
rotated to the approximate vertical position,
the pin will automatically return to its
position and lock the leg again.