Xterra FB150 - Step 3: Seat

8
FB150 Folding Bike
1. Screw off 3 at washers (16) and 3 nylon nuts (17) the back
of seat (07).Attach the seat (07) to the seat post tube (03),
tighten with3 at washers (16) and 3 nylon nuts (17).
2. Insert the seat support tube (3) to the main frame (01), fasten
with a club knob (10).
1 Club Knob (#10)
Pre-assembled on
seat:
3 Flat Washers (#16)
3 Nylon Nuts (#17)
Seat
3
Hardware Step 3