How to fix Xterra Exercise Bike monitor not displaying?
If the monitor on your Xterra Exercise Bike isn't displaying, first, ensure the adapter is properly plugged in. Also, check that the computer wires are securely connected at both the upright and the computer.
What to do if heart rate is not displaying on Xterra SB250?
If the heart rate is not displaying on your Xterra Exercise Bike, make sure the pulse wires are securely connected. If that doesn't solve the issue, the hand pulse grip might be defective and require replacement or the monitor itself may need replacing.
Why no speed or distance displays on Xterra SB250 Exercise Bike monitor?
If speed or distance aren't showing on your Xterra Exercise Bike monitor, check the sensor wire connections at the upright and computer. If the connections are good, the sensor wire or the monitor itself might be faulty and need replacing.
How to stop grinding noise in Xterra SB250?
A grinding noise in your Xterra Exercise Bike could be due to a defective crank bearing, idler pulley, or flywheel. Consider replacing these parts to resolve the issue.
Why is there no tension on my Xterra Exercise Bike?
If you're experiencing no tension on your Xterra Exercise Bike, it could be due to a malfunctioning magnetic wheel which would need replacing. Also, ensure the computer wires are properly connected at the upright and the computer.
What does E1 error mean on Xterra SB250 Exercise Bike?
If your Xterra Exercise Bike displays an E1 error, it indicates the monitor can't read the signal change from the gear motor. This could be due to a faulty monitor (replace the monitor), damaged or disconnected connection cables from the monitor to the gear motor (check all computer plugs and wires are connected firmly), a damaged gear motor (replace gear motor), or a motor wire that's too short (adjust the length of motor wire).
How to fix squealing noise on Xterra SB250?
A squealing sound in your Xterra Exercise Bike may be caused by a slipping V-belt. Try adjusting the V-belt to resolve this issue.
What does E2 error mean on Xterra SB250 Exercise Bike?
If your Xterra Exercise Bike displays an E2 error, this means that the computer cannot interface with the IC chip. This is caused by a problem with the EEPROM. Replace the monitor.
What does E3 error mean on Xterra SB250 Exercise Bike?
If your Xterra Exercise Bike displays an E3 error, it means that the gear motor cannot read the signal change from level one within 4 seconds after pressing the start button. Replace the gear motor.
General| Resistance Levels | 8 |
|---|---|
| Weight Capacity | 250 lbs |
| Maximum User Weight | 250 lbs |
| Resistance Type | Magnetic |
| Drive System | Belt |
| Seat Type | Padded |
| Display | LCD |
| Warranty | 1 year |
| Heart Rate Monitoring | Yes |
| Pedals | Adjustable Straps |
| Dimensions | 34" L x 20" W x 48" H |
Follow safety precautions to reduce the risk of electric shock.
Follow warnings to prevent burns, fire, electric shock, or injury.
General safety guidelines for using fitness equipment.
Steps for attaching the front stabilizer to the main frame.
Instructions for assembling the support tube and rear stabilizer.
Steps to assemble and connect the console and upright components.
Instructions for assembling the seat, including cushions and covers.
Troubleshooting steps for monitor display, speed, and distance problems.
Solutions for tension, heart rate, and noise-related problems.
Explanation and solutions for specific error codes displayed by the monitor.
To Next Page
