16
SB250 Recumbent Bike
Program
Introduction
&
Operation
Manual Program: Manual
P1 is a manual program. User can start exercise by pressing START/STOP key. The default resistance
level is 3. Users may exercise in any desirous of resistance level (Adjusting by UP/DOWN keys during the
workout) with a period of time or a number of calories or a certain distance.
Operations:
1. Use UP/DOWN keys to select the MANUAL (P1) program.
2. Press the ENTER key to enter MANUAL program.
3. The TIME will ash and you can press UP or DOWN keys to set your exercise TIME. Press ENTER key
to conrm your desired TIME.
4. The DISTANCE will ash and you can press UP or DOWN keys to set your target DISTANCE.Press
ENTER key to conrm your desired DISTANCE.
5. The CALORIES will ash and you can press UP or DOWN keys to set your exercise CALORIES. Press
ENTER key to conrm your desired CALORIES.
6. The PULSE will ash and then you can press UP or DOWN keys to set your exercise PULSE. Press
ENTER key to conrm your desired Pulse.
7. Press the START/STOP key to begin exercise.
Preset Program:
Steps, Hill, Rolling, Valley, Fat Burn, Ramp, Mountain, Intervals, Random, Plateau, Fartlek, Precipice
Program
PROGRAM 2 to PROGRAM 13 is the preset programs. Users can exercise with different level of loading in
different intervals as the proles show. Users may exercise in any desirous of resistance level (Adjusting by
UP/DOWN keys during the workout) with a period of time or a number of calories or a certain distance.
Operations:
1. Use UP/DOWN keys to select one of the above programs from P2 to P13.
2. Press the ENTER key to enter your workout program.
3. The TIME will ash and you can press UP or DOWN keys to setting your exercise TIME. Press ENTER
key to conrm your desired TIME.
4. The DISTANCE will ash and you can press UP or DOWN keys to setting your target DISTANCE.
Press ENTER key to conrm your desired DISTANCE.
5. The CALORIES will ash and you can press UP or DOWN keys to setting your exercise CALORIES.
Press ENTER key to conrm your desired CALORIES
6. The PULSE will ash and then you can press UP or DOWN keys to set your exercise PULSE. Press
ENTER key to conrm your desired Pulse.
7. Press the START/STOP key to begin exercise.
User Setting Program: User 1, User 2, User 3, User 4
Program 14 to 17 is the user setting program. Users are free to create the values in the order of TIME,
DISTANCE, CALORIES and the resistance level in 10 columns. The values and proles will be stored in
To Next Page
Loading...
Need help?
General
