SB250 Recumbent Bike
15
DISTANCE BAR: Every bar indicates 0.1 mile.
SPEAKER: To listen to an MP3 during your workout, connect the MP3 to the
monitor (6) by using the audio wire (86). Volume is controlled by
the MP3 player.
PROGRAM: Displays the program level from P1 to P23
P1 –Manual you can control the tension level
P2 to P13 programs are preset at the factory.
P14 to P17 programs are user setting
P18 to P22 programs are heart rate control programs
P23 body fat program
Note: Install the 4 rechargeable batteries. If batteries are not
inserted the monitor will display P1 to P24.
Remarks
The cycle is auto tension system. The monitor will only function while you insert adaptor.
Once you stop pedaling the monitor will shut off after 100 seconds. All values will be
reset to zero except for your saved user programs.
You will need to start pedaling before 30 seconds to keep your inputted data.
To listen to an MP3 during your workout, connect the MP3 with the computer (6) by using
the audio wire (86).
To Next Page
Loading...
Need help?
General
