15
Customer Service 1-888-707-1880 Dyaco Canada Inc. 2018
Email: customerservice@dyaco.ca
Program Operation
Manual Program
In idle mode, you can directly start or press ENTER to set the countdown parameters (time, distance,
calories). Press SPEED ▲ , and ▼ in order to adjust the time, distance, calories, confirm and press
ENTER key to switch time, distance, calories; the system only accepts the last number of parameters.
For example, if the last input is a distance, the previous parameter will be invalid, and only the distance
setting will be accepted.
The default TIME preset is 30: 00 (5: 00 ~ 99: 00); for each increase, the minimum value is 1:00. The
default preset of DISTANCE is 5.00 miles (1.00 ~ 9.00); for each additional, the minimum value is 1.00.
Default CALORIE value is 500 (10 ~ 9990); for each increase, the minimum is 10. The default SPEED is
0.5 miles.
Preset Programs
There are 24 groups of programs (P1 ~ P24); press the PROGRAM key to select P1 ~ P24, you can press
the START button to start directly or press the ENTER key to enter the set time parameter.
Time to def
aults: 30: 00 (5: 00 ~ 99: 00), each increase or decrease the value of 1:00, set directly press
the START button to start.
To Next Page
Loading...
Need help?
General
