Xterra UB2.5 - User Program; Setting Parameters for User Programs

UB2.5 Upright Bike
15
User Program
Four User Programs allow the user to create their own personal programs.
Setting Parameters for User Programs
Select “User” using UP / DOWN KEY then press ENTER KEY. The rst parameter, “Time”
will ash indicating the value can be adjusted using UP / DOWN KEY. Press ENTER KEY to
save value & move to next parameter to be adjusted. **(If user sets up the target time to
workout, then the next parameter of Distance can not be adjusted) Continue through all
desired parameters.
After completing parameter set up, row 1 of the prole will be ashing. Use UP / DOWN KEY
to adjust level then press ENTER until nished (10 times total). Press START / STOP to start
workout.
Note: When any one of the workout parameters counts down to zero the console emits a
beep sound and the workout stops automatically. Press START KEY to continue the workout
to reach the unnished workout goals set.