The XTM NGX40 Fridge Freezer 41L (CFR5030XTM, PLU 677675) is a portable cooling device designed for private household use, specifically for use in cars, 4WDs, caravans, mobile homes, and campervans. It is intended to cool food and beverages and should be set up and used in dry, weather-protected areas. The appliance comes with a 5-year warranty.
Function Description:
The XTM NGX40 Fridge Freezer functions as a portable refrigerator and freezer, capable of maintaining temperatures between -18°C and +10°C. It operates from either a 12V/24V DC power source (such as a car cigarette lighter socket, vehicle battery, or power bank) or a 240V AC mains supply using the included AC Adapter. The unit features a compressor-based cooling system, an electronic control panel for temperature adjustment and settings management, and a multi-level battery protection system to prevent excessive discharge when connected to a vehicle battery.
Important Technical Specifications:
- Gross Capacity: 41L
- Climatic Class: T/ST/N/SN
- Rated Voltage - DC: 12V / 24V DC
- Rated Current - DC: 8.5A / 4.3A
- IP Rating: IPX4 (protection against splashing water from any direction)
- Protection Level: (Indicated by a symbol, likely related to electrical safety)
- Refrigerant Type/Amount: R134a - 47g
- Foam Vesicant: Cyclopentane (flammable material, requires special disposal procedures)
- Temperature Range: -18°C to +10°C
- Net Weight: 16KG
- Dimensions: 710mm (length) x 430mm (width) x 420mm (height)
- USB Ports: 2 x USB-A, 1 x USB-C
- USB Power Output: 15W (5V/3A) max across all 3 sockets (5W MAX each for 3 in use, 7.5W MAX each for 2 in use, 15W MAX for 1 in use).
Usage Features:
- Installation: The fridge should be placed in a dry, splash-protected area, away from direct heat sources. Adequate airflow (5-10cm clearance) around the grilles is recommended for efficient operation. The cooling system is designed to operate correctly on angles up to 30 degrees, with continuous operation at angles over 30 degrees limited to a maximum of four hours.
- Power Connection:
- DC Source: Connect the supplied 12V/24V DC power cord to the fridge's DC power socket and then to a vehicle cigarette lighter socket or suitable 12V/24V DC power source. The fridge will automatically turn on. Ensure the socket is adequately fused (15A in-line fuse protection recommended for new installations with Ø6mm (AWG11) 4.58mm² Twin Sheath Two Core cable directly connected to battery terminals). Incorrect cord size or gauge can lead to voltage drop.
- AC Source: Use the supplied AC Adapter. Connect the AC cable plug to the adapter, then the DC plug from the adapter to the fridge's DC Input Socket, and finally the 3-pin mains plug to a suitable wall outlet. It is recommended to set the Battery Protection level to LOW when operating with the AC Adapter.
- Solar Panels: The fridge can be used with solar panels (100-200 watts recommended) but must be connected via a suitable DC battery, not directly to the solar panels.
- Generators: The fridge must not be connected directly to a generator. Connection must be via a battery. If charging the battery with a digital or inverter generator, use a 'smart battery charger' connected to the generator's AC output.
- Control Panel and Operation:
- Power (1): Press and hold for 3 seconds to turn the unit on or off.
- Power Mode (2): Switches between "Quick mode" and "Eco mode." Default is Eco mode.
- Battery Protect (3): Selects "Low," "Medium," or "High" battery protection levels. Default is Medium. This system prevents excessive battery discharge. The fridge will restart automatically once input voltage is reached and will retain original settings. An audible beep indicates activation.
- Light Mode (4): Adjusts the internal light's setting to "Low," "Medium," or "High." Default is High.
- Temp. Adjust (5): Up/down arrows to set the desired temperature. Default is 5°C. Short press changes temperature by 1°C, long press by 4°C. Temperature range is -18°C to +10°C.
- Control Lock (6): Press and hold for 3 seconds to lock/unlock the control panel. When locked, all buttons are disabled, and the indicator LED flashes if a button is pressed. The lock setting is retained even after power loss.
- Temperature Scale: Press and hold the Up and Down arrows for 10 seconds to switch the display between "°C" and "°F." Default is "°C."
- Muting Sounds: Press and hold Power Mode and Down arrow buttons simultaneously to turn the buzzer sound function on or off. Default is ON.
- Lid Latch Operation: The lid has a lock feature to prevent accidental opening during transit. Slide the latch left to lock and right to unlock.
- USB-A and USB-C Sockets: Provides power for charging phones or small items. Ensure the rubber plug is securely fitted when not in use to protect against water/dust. Do not use when wet.
- Tie-Down Brackets: The fridge includes 4 metal tie-down brackets that clip onto the handle bars, allowing for secure fastening to a fridge slide or vehicle using adjustable straps (straps sourced separately).
Maintenance Features:
- Cleaning:
- Clean the fridge prior to initial use and periodically thereafter.
- Use a cloth slightly moistened with lukewarm water. Avoid water drops on seals and electronics.
- Dry the fridge with a cloth after cleaning.
- For stubborn dirt, use sodium bicarbonate dissolved in lukewarm water.
- DO NOT use solvents, agents with sand or acid parts, brushes, graters, or hard sharp tools for cleaning.
- Always disconnect the power cord and switch off the fridge before cleaning.
- After washing, rinse with clean water and dry carefully.
- When storing for long periods, DO NOT fully close the fridge to prevent mould and odours.
- Replacing the DC Fuse:
- Unscrew the plastic end cap of the DC plug.
- Carefully remove the end cap and metal cap.
- Remove the defective fuse.
- Insert a new 15A fuse of the same type and rating.
- Place the metal cap back onto the fuse and screw the plastic end cap back on.
- Troubleshooting: The manual provides a detailed table of error codes (E1-E6) and common issues (fridge not working, poor cooling, abnormal noise, condensation) with possible causes and solutions. For example, E1 (Low Input Voltage) suggests checking power connections, adjusting battery protection settings, or using a higher output power source. E3 (Compressor Start Fault) recommends shutting down and restarting the fridge, and checking for input voltage issues.
- Disposal: At the end of its life, the fridge should be disposed of responsibly at an appropriate recycling centre, as its insulation contains flammable cyclopentane. Contact your local council for advice.
- Customer Service: For service, spare parts, or product information, contact SITRO GROUP AUSTRALIA PTY LTD at 1300 174 876 (Monday - Friday, 8:00 am - 5:00 pm AEST). Keep your purchase receipt for warranty claims.
Need help?
General
To Next Page
