© Xtrac 2015 Page 2 of 2
All customers with clutch shafts at issue 3 or lower are asked to return them to Xtrac for
modification. Ref. Figure 1.2 for issue number identification.
New clutch shafts supplied by Xtrac from 05/05/2015 will have the issue number 4 or
higher and will be manufactured with the reduced nose journal diameter, unless
otherwise notified.
All 1152-900-000A gearboxes fitted with the 1152-420-000A clutch shaft and supplied
by Xtrac from 05/05/2015 will also have the issue number 4 or higher and will be
manufactured with the reduced nose journal diameter, unless otherwise notified.
For further information please contact:
To Next Page
Loading...