Need help?Do you have a question about the Xtralis VEP-A00-1P and is the answer not in the manual?
General| Product Type | Aspirating Smoke Detector |
|---|---|
| Number of Pipes | 1 |
| IP Rating | IP30 |
| Operating Humidity | 10% to 95% RH (non-condensing) |
| Supply Voltage | 18 to 30 VDC |
| Sampling Pipe Ports | 1 |
| Detection Principle | Laser-based light scattering |
| Sampling Method | Aspiration |
| Alarm Sensitivity Range | 0.005% to 20% obs/m |
| Operating Temperature | 0°C to 39°C (32°F to 104°F) |
Details pipe setup for small ventilation ducts, including hole placement and quantities for VEP-1P and VEA detectors.
Outlines pipe configuration for large ventilation ducts, specifying multi-branch setups for VEP-1P detectors.
Provides essential guidelines for designing VESDA-E systems in ducts for VEP-1P and VEA detectors.
Covers critical environmental factors like temperature, humidity, and static pressure for detector installation.
Lists important factors for installing VESDA-E systems in ducts, including placement and vibration.
Explains methods to adjust pipe hole orientation for optimal differential pressure and detector function.
Details the procedure for testing and verifying the system's performance after installation.
Emphasizes the need to adhere to all local codes and standards for maintenance requirements.
Specifies performance verification checks to be conducted during the first year of operation.
Describes how the detector indicates filter needs and the subsequent verification process.
Outlines the procedures to be followed during site visits for system inspection and maintenance.
To Next Page