Ducts Application Note VESDA-E
35424_02 i
Preface
Xtralis has designed an air sampling smoke detection system specifically for use in ventilation ducts. The
information contained in this document will assist you when designing VESDA-E systems for this type of
application.
This system is not suitable for use in flexible ducts.
Related Products
VESDA-E VEP-1P and VEA detectors have been specially adapted for installation in ducts. Their model
numbers are VEP-A00-1P, VEA-040-A00 and VEA-040-A10.
Copyright
©
2021 Xtralis AG.
To Next Page
Loading...
