Xtrend ET4000 - User Manual

(A) Safety Instructions
This product should not be disposed with other house hold wastes at the end of
its working life.Please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. This will help
prevent harm to the environment or human health from uncontrolled waste disposal.
● This product operates only in the range of AC 100V~250V and 50Hz/60Hz.
Please check first your power supply to see if it fits this range.
● Please be noted that you need to disconnect from the mains before you start any
maintenance or installation procedures.
● Make sure that the power cord is placed in a position where it is easy to unplug it from
the mains in an emergency.
● Do not overload a wall outlet, extension cord or adapter as this may cause electrical
fire or shock.
● This product is not water-proof and should not be exposed to dripping, splashing,
or any type of liquid.
● No objects filled with liquid such as base shall be placed on the product.
● Please do not clean the product with wet cloth, which may cause a short circuit.
● No wet objects should be placed near the product.
● Disconnect the power of the product before you connect the satellite cable
to the product. Otherwise, it may cause damage to the LNB.
● The LNB must be earthed to the system earth for the satellite dish.
● Unplug the product and disconnect the antenna cable during a thunderstorm
or lightening, especially when left unattended and unused for a long period of time.
This will prevent possible damages from power surges or lightening
● Place the product indoor.
● Do not expose the product to rain, sun or lightening.
● Do not place the product near any heat appliances as a radiator.
● Ensure that there is more than 10 cm distance from any electrical devices & wall.
02
Xtrend ET4000
(B) Packaging Contents
Please check all package contents before using your product.
● ET4000
● Remote Control
● Batteries
● HDMI cable (Optional)
● A/C Adaptor
● Power Code
● User Manual
03
Xtrend ET4000

Summary

Safety Instructions

General Safety Precautions

Important guidelines for safe operation, handling, and disposal of the product to prevent harm.

Packaging Contents

Included Items

Lists all components provided with the Xtrend ET4000 receiver for initial use.

Product Descriptions - Front Panel

Front Panel Overview

Details the buttons (Standby/Channel+/-) and connectors (USB, Smartcard reader) on the front of the device.

Product Descriptions - Rear Panel

Rear Panel Connectivity Ports

Identifies and explains the purpose of each connector on the rear of the receiver.

Remote Control Functions

Remote Control Button Guide

Explains the primary functions of each button on the remote control for device operation.

Remote Control - Playback and Special Functions

Playback and Special Button Functions

Details buttons for media playback, timers, text, audio, and help functions.

Main Features

Key Technical Specifications

Outlines the hardware and software capabilities, including processor, OS, memory, and connectivity.

Installation Guide

Connecting Satellite Cables

Step-by-step guide for connecting the satellite cable to the LNB-IN port for signal reception.

Connecting the TV - HDMI

Connecting via HDMI Cable

Instructions for connecting the receiver to a TV using an HDMI cable for optimal picture quality.

Connecting the TV - RCA (Video;Audio)

Connecting via RCA (Video) Cable

Guide for connecting the receiver to a TV using composite RCA cables for audio and video signals.

Power ON;OFF

Power Management Modes

Details methods for powering the device ON/OFF, including complete shutdown, standby, and deep standby modes.

Xtrend ET4000 Specifications

General

Dimensions	370 x 61 x 240 mm
Processor	400 MHz
RAM	256 MB
CI Slot	1
USB Ports	2
HDMI Output	1
SCART Output	1
RAM Size	256 MB
Tuner Type	DVB-S2
Operating System	Linux
Connectivity	Ethernet
CPU	Broadcom
USB	2.0
Video Formats	H.264
Audio Formats	MP3
Resolution	Up to 1080p (Full HD)