works just as good for those who want
to power the passive subwoofers
or any other subwoofers. SUB AMP1
as a amplifier for bi-amping for full range speakers
By using one or two subwoofers (with correct
placement), it is often easier to get a better
is equipped with a powerful
300 watt amplifier with a large heat sink
effective cooling. For professional
etc), it is equipped with a balanced input. T
terminal connectors are gold plated and very solid.
To achieve a high power and a long durabil
amplifier use a large toroidal transformer, large
electrolytic capacitors and Toshiba bipolar
transistors in the output stage.
The active amplifier also
adjustment options, not possible to obtain us
passive filter. These include
pass filtering, volume etc.
By using these settings, the main amplifier is
relieved and only needs to drive the midrange and
treble. This usually results in lower distortion and
the risk of damages on it is lowered.
Carefully unpack the speaker, and pay attention so
you don't break anything. If possible, save the
packing box for future transportations. If there
should be damage on the loudspeaker, please
Check that the mains voltage marking on the back
panel matches your local mains voltage.
If the product is cold, wait to connect the power
cable till it reaches room temperature. If you don’t
do this you can cause damage of the product.
Main power cable
User manual
Logotype
Robber feet
To Next Page
Loading...
