XTZ Sub Amp 1 - Mounting and Connection Tips; Mounting and Phase; Overload and Load Limits

-
8
-
Mounting and connecting tips
Mounting
alternatives
SUM AMP1
is constructed to be placed lying down
or standing up.
Place the logotype in same direction
as SUB AMP1
Mount the feet on the side you want
to be
down.
Connect using the
correct phase
Always connect using the correct phase, from the
+-pole on the amplifier to the +-
pole on the
loudspeaker and corresponding for minus (-).
If you by accident connect the other way,
there is no risk of
damage. However, the
sound will not be correct, especially in the
lower frequencies.
Overload
With high power load under long time there is risk
of overloading the driver and/or the amplifier.
If you play extremely
loud for a long time
there is a
big risk that you destroy the
product.
Load
We recommend that no more than 2pcs of 8 Ohms
subwoofer should be connected to SUB AMP1.
This is because the impedance should be
extremely
low.