Need help?Do you have a question about the Yachting FC500 and is the answer not in the manual?
General| Resolution | 480 x 272 pixels |
|---|---|
| Waterproof Rating | IPX7 |
| GPS | Yes |
| Water Temperature Sensor | Yes |
| Display Size | 5 inches |
| Display | Color LCD |
| Frequency | 200 kHz / 83 kHz |
| Transducer | Included |
Lists all components included in the package for installation.
Guides the assembly and installation of the sonar unit components.
Details the process of mounting the sensor system onto the bait boat.
Details the first method for installing the RTS sensor using a supporting plate.
Details an alternative method for mounting the sensor based on bait boat structure.
Lists tools not included with the product necessary for installation.
Provides initial steps and guidance for using the fishfinder.
Explains the various elements displayed on the fishfinder screen during operation.
Describes the function of each button on the fishfinder's control panel.
Adjusts how echoes are displayed on the screen for better detail visibility.
Filters out unwanted noise for a clearer sonar image.
Enhances visibility of strong and weak sonar returns on the display.
Adjusts the threshold for detecting and displaying fish size.
Determines the portion of the depth that is displayed on the screen.
Enlarges specific depth segments for viewing small details and fish signals.
Allows adjustment of the screen brightness for use in low-light conditions.
Enables adjustment of the display contrast for optimal viewing.
Selects which data readouts (depth, temp, voltage) are displayed on the screen.
Alerts the user when the bottom depth becomes shallower than the set limit.
Sounds an alarm when the fishfinder detects a fish.
Alerts when the sonar unit's battery strength drops below a set level.
Alerts when the bait boat's battery strength drops below a set level.
Determines if the fishfinder emits a tone when a key is pressed.
Allows selection of depth and temperature units (e.g., meters, feet, Celsius, Fahrenheit).
Allows choosing the language for menu operations.
Restores the fishfinder to its original factory settings.
Enables practice using the fishfinder features without being on the water.
Addresses issues with no signal on screen or no display after powering on.
Solves inconsistent readings, vibrating screens, and missing fish displays.
Troubleshoots range limitations, cluttered displays, and unit stopping.
Provides guidelines for cleaning and maintaining the fishfinder unit.
Outlines the product warranty coverage and conditions.
Details the technical specifications and features of the fishfinder.
Specifies the power supply requirements for the control box and sonar unit.
Provides contact details for customer support and inquiries.
To Next Page