To Next PageTo Next Page
Need help?Do you have a question about the Yaesu FT-817ND and is the answer not in the manual?
General| Output power | 1 W |
|---|---|
| Frequency range | 30 - 100000 MHz |
| Channels quantity | 208 channels |
| Display type | LCD |
| Product type | Portable CB radio |
| Product color | Black |
| Housing material | - |
| Battery type | AA |
| Number of batteries supported | 8 |
Weight and Dimensions| Depth | 165 mm |
|---|---|
| Width | 135 mm |
| Height | 38 mm |
Instructions for connecting the YHA-63 antenna to the transceiver's BNC connector.
Guide on how to connect and disconnect the microphone to the MIC jack.
Details on how to install and use alkaline AA batteries in the FBA-28 holder.
Guide for connecting an external 13.8 Volt DC power source to the transceiver.
Steps for installing the FNB-85 Ni-MH battery pack into the transceiver.
Instructions for charging the FNB-85 Ni-MH battery pack using the NC-72B/C charger.
Procedure for powering the transceiver on and off using the PWR switch.
A quick guide to navigating and changing menu settings.
Steps to set the operating frequency using the DIAL and SEL knobs.
Basic setup and operation for SSB transmission, including power output.
Operating CW using straight keys, external keyers, and the built-in electronic keyer.
Basic setup and operation for FM transmission, including repeater functions.
Operating digital modes like RTTY, PSK31, and custom USER modes.
Normal and split-frequency memory storage, recall, and masking.
General procedure for scanning bands or memories.
Using PMS to limit scanning within defined frequency ranges.
General procedure for accessing and changing menu settings.
Step-by-step instructions for transferring data between transceivers.
