Need help?Do you have a question about the Yaesu FT-818 and is the answer not in the manual?
General| Antenna Impedance | 50 ohms |
|---|---|
| Antenna Connector | SO-239 |
| Power Output | 6W (HF/VHF/UHF) |
| Modes | AM, FM |
| Power Supply Voltage | 13.8 V DC ±15% |
| Dimensions | 135 x 38 x 165 mm (W x H x D) |
| Channels/Memory | 200 channels |
| Battery Option | Ni-MH, 9.6 V, 1900 mAh |
| Current Consumption | Approx. 450 mA (Receive), 2.0 A (Transmit) |
| Receiver Sensitivity | 0.2 μV (SSB/CW, 10 dB S/N) |
Lists accessories included with the transceiver.
Instructions for connecting the provided antenna to the transceiver.
Details on how to connect the microphone to the transceiver.
Steps for inserting and using AA alkaline batteries.
How to connect the transceiver to an external DC power source.
Procedures for installing and using the Ni-MH battery pack.
Steps for charging the Ni-MH battery pack.
Describes the power on/off switch and its operation.
Explains the adjustment of receiver audio volume level.
Details the RF gain and squelch control functionality.
The primary dial for tuning and menu selection.
To Next Page
