To Next PageTo Next Page
Need help?Do you have a question about the Yaesu FT-857D and is the answer not in the manual?
General| Modes | SSB, CW, AM, FM, WFM |
|---|---|
| Impedance | 50 Ohms, unbalanced |
| Supply Voltage | 13.8 V DC ±15% |
| Frequency Range | 420-470 MHz |
| Power Output | 100 W (HF/50 MHz), 50 W (144 MHz), 20 W (430 MHz) |
| Current Consumption | 22 A (maximum) |
| Dimensions | 155 x 52 x 233 mm (6.1" x 2.0" x 9.2") |
| Weight | 2.1 kg |
| Channels | 200 |
| Receiver Sensitivity | 0.2 μV (SSB/CW) |
Detailed specifications for the transmitter, covering RF power output, modulation types, and spurious radiation.
Performance specifications for the receiver, including sensitivity, selectivity, and audio output characteristics.
Instructions for visually inspecting the transceiver upon unpacking for any shipping damage.
Recommendations for proper installation, including ventilation and placement.
Essential safety precautions regarding RF energy, electrical hazards, and vehicle operation.
Step-by-step guide for connecting the microphone and installing the detachable front panel.
Detailed instructions for correctly connecting the transceiver to a DC power source.
Guidelines for establishing an effective ground system for mobile and base stations.
Key factors and guidelines for successful antenna installation and impedance matching.
Ensuring proper airflow around the transceiver to prevent overheating.
Instructions for connecting and controlling external linear amplifiers.
Guidance on connecting straight keys and electronic keyers for CW transmission.
Details on AF, SQL/RF, SELECT knobs, HOME/CLAR keys, and the MAIN DIAL.
Explanation of FUNC, MODE, DSP, POWER, and TX/BUSY indicator functions.
Controls for band selection, V/M switching, LOCK function, and the LCD display.
Description of MIC, SP/PH, METER, and EXT SPKR jacks for various connections.
Details on the DC INPUT jack for power and the CAT/LINEAR jack for control.
Information on connecting HF/50 MHz and 144/430 MHz antennas to the transceiver.
How to navigate and select different frequency bands for operation.
Guide to selecting various modes like SSB, CW, AM, FM, DIG, and PKT.
Methods for tuning frequencies using the DIAL and SELECT knobs in different modes.
Basic setup and operation for SSB and AM transmission modes.
Procedures for CW operation using straight keys, external keyers, or computer interfaces.
Basic setup and operation for FM transmission modes.
How to configure and use the transceiver for repeater communication.
Setting up and operating various digital modes using AFSK configurations.
Performing split-frequency operations for DX working or satellite communication.
Storing and recalling frequencies in the main memory registers, including split frequencies.
Procedures for initiating and managing scan operations in VFO or Memory modes.
Reference table of command opcodes for controlling the transceiver via CAT.
