To Next PageTo Next Page
Need help?Do you have a question about the Yaesu FT-897D and is the answer not in the manual?
General| Product type | Portable CB radio |
|---|---|
| Product color | Black |
| Housing material | - |
| Input voltage | 13.8 V |
| Output power | 100 W |
| AM band range | 6 - 20 kHz |
| FM band range | 15 - 30 MHz |
| Frequency range | 0.1 - 470 MHz |
| Channels quantity | 200 channels |
| Compatible products | FC-40 Antenna FC-30 Automatic Antenna Tuner Collins CW Filter 500 Hz, 7-pole Collins SSB Filter 2.3 kHz, 10-pole MD-100A8X\\tDesktop Microphone CD-24\\tCharge Adapter |
| Microphone included | Yes |
| Display type | LCD |
Weight and Dimensions| Depth | 262 mm |
|---|---|
| Width | 200 mm |
| Height | 80 mm |
Procedures for connecting various power sources to the transceiver.
Specifics for connecting and operating with an external DC power source.
Advice for optimal mobile installation and DC power connection.
Instructions for installing and operating the optional battery pack.
Procedure for selecting AC input voltage for USA users.
Basic setup and operation for SSB and AM transmission modes.
How to use the VOX system for hands-free transmit/receive switching.
How to use the AF Speech Processor to increase average power output.
Procedures for CW transmission using various keying methods.
How to use the built-in electronic keyer for CW generation.
Setup and operation for FM transmission.
Using the ARTS system for range communication status.
Overview of digital mode capabilities using AFSK.
Setup for PSK31 communication using USB or LSB injection.
How to monitor HF WeatherFax broadcasts.
Operation of the ATAS-100/-120 active-tuning antenna system.
Tips for deriving best performance from the ATAS system.
Operation of the optional FC-30 automatic antenna tuner.
How to adjust the audio stage frequency response with DSP.
Connecting and operating with straight keys or computer keying.
Steps for basic FM transmission setup and microphone gain adjustment.
How to scan for an unknown DCS code.
Customizing alert beep modes for ARTS operation.
Setup and operation for RTTY communication.
Using USER modes for custom digital operations like SSTV, Fax.
How to activate and set the Time-Out Timer to prevent long transmissions.
Procedure for manual tuning of the ATAS antenna for optimal SWR.
Importance of good mechanical and RF ground connection for ATAS.
How the FC-30 stores and uses impedance matching data.
Details on adjusting VOX Gain and Hang-Time.
How to configure and use the repeater function.
How to configure split tone operation for CTCSS/DCS.
How to program the CW identifier for automatic transmission.
Setup for packet communication using FM.
How to perform split frequency operation for DX and repeater work.
Steps for resolving situations where the ATAS antenna has trouble tuning.
Using external wattmeters with the ATAS system.
Notes on operating the ATAS system on non-specified bands.
