Page 1FT-897D OPERATING MANUAL
The FT-897D is a rugged, innovative multiband, multi-
mode portable transceiver for the amateur radio MF/HF/
VHF/UHF bands. Providing coverage of the 160-10 meter
bands (include the 60 m band: USA version) plus the 6 m, 2
m, and 70 cm bands, the FT-897D includes operation on
the SSB, CW, AM, FM, and Digital modes, yielding the most
comprehensive performance package available for field op-
eration.
Designed for use from (1) an external DC power source,
(2) internal battery (requires optional FNB-78 Ni-MH bat-
tery pack), or (3) AC power source (requires optional FP-
30 External AC Power Supply), the FT-897D provides 100
watts of power output from a 13.8-Volt external power sup-
ply or AC operation. When using the optional FNB-78 Ni-
MH Battery Pack, the FT-897D automatically switches to
20 Watts (430 MHz:10W) of output power.
The multi-function Liquid-Crystal Display includes at-
tractive backlighting, which may be disabled for battery con-
servation. The display includes bar-graph indication of power
output, ALC voltage, SWR, and modulation level. Also in-
clude are a number of operating status icons, as well as the
function displays for the three operating function keys (A,
B, and C).
INTRODUCTION
Among the advanced features of the FT-897D are many
incorporated only in large base-station transceivers. These
include Dual VFOs; Split-Frequency operation; Digital Sig-
nal Processing (Bandpass Filtering, Noise Reduction, Notch,
and Microphone Equalizer); IF Shift; Clarifier (“R.I.T.”);
IF Noise Blanker; AGC Fast/Slow/Auto/Off selection; RF
Gain and Squelch control; IPO (Intercept Point Optimiza-
tion) and a receiver front-end Attenuator; Built-in High Sta-
bility Reference Oscillator; AM Aircraft reception; AM and
FM Broadcast reception; U.S. Weather Band reception;
VOX; Built-in Electronic Keyer; Adjustable CW Pitch;
Automatic FM Repeater Shift (ARS); Built-in CTCSS En-
coder/Decoders; ARTS™ (Auto-Range Transponder Sys-
tem); Smart Search™ Automatic Memory Loading System;
Spectrum Scope; 200 Memories plus Home Channels and
Band-limiting Memories; Alpha-Numeric Labeling of
Memories; Automatic Power-Off (APO) and Time-Out Timer
(TOT) functions; Computer Interface capability; and Clon-
ing capability.
We urge you to read this manual in its entirety, so as to
gain a full understanding of the amazing capability of the
exciting new FT-897D Transceiver.
To Next Page
