Need help?Do you have a question about the Yaesu FT-8500 and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | FT-8500 |
| Category | Transceiver |
| Language | English |
Explains the 3-axis joystick for tuning, selection, and programming.
Covers initial transceiver checks and the process of installing the FS-10 Smart Controller.
Guides users through initial setup and basic operating procedures for the transceiver.
Covers powering the transceiver on/off, adjusting volume/squelch, and selecting VHF/UHF operation.
Explains how to select DIAL or Memory modes and the structure of memory channels.
Introduces advanced features and details the operation of the Spectra-Analyzer.
Explains the Auto Receiver Mute feature, its settings, and activation.
Covers storing memories, transferring memory banks, and recalling stored data.
Explains direct memory recall, setting up the Home channel, and split memory operation.
Explains Busy Scan, Clear Scan, and how to configure memory skip for scanning.
Covers PMS scanning, one-touch PMS, and priority memory monitoring features.
Covers PMS scanning, one-touch PMS, and priority memory monitoring features.
Explains CTCSS tone functions for repeater access and the CTCSS Bell paging feature.
Explains CTCSS tone functions for repeater access and the CTCSS Bell paging feature.
Introduces DTMF features for selective calling, code squelch, and paging.
Details DTMF code squelch operation, DTMF paging, and personal code memory setup.
Details DTMF code squelch operation, DTMF paging, and personal code memory setup.
Details DTMF code squelch operation, DTMF paging, and personal code memory setup.
Guides on configuring code memories, DTMF code squelch, and DTMF paging operations.
Guides on configuring code memories, DTMF code squelch, and DTMF paging operations.
Explains Trigger Paging and the One-Touch Paging display feature.
Explains Trigger Paging and the One-Touch Paging display feature.
Details automatic answer-back paging and setting the transmitter delay for DTMF calls.
Details automatic answer-back paging and setting the transmitter delay for DTMF calls.
Explains how to send messages using DTMF and the required message format.
Covers DTMF message operation, sending stored messages, and manual message sending.
Covers DTMF message operation, sending stored messages, and manual message sending.
Provides troubleshooting tips for common issues and procedures for resetting memories and the CPU.
Explains the serial data protocol and provides the PCC command coding table for computer control.
Explains the menu organization, navigation, and basic entry procedures for settings.
To Next Page
