What to do if my Yaesu FTA-250L Transceiver cannot be operated when connecting the SCU-15 headset adapter cable?
If your Yaesu Transceiver cannot be operated when connecting the SCU-15 headset adapter cable, it might be because the plug on the SCU-15 headset adapter cable is not properly inserted into the MIC/SP jack. To resolve this, ensure the plug is fully pushed into the MIC/SP jack for proper contact and secured with the two screws.
General| Brand | Yaesu |
|---|---|
| Model | FTA-250L |
| Category | Transceiver |
| Language | English |
Instructions for correctly attaching the antenna to the transceiver.
Instructions to activate and cancel the emergency communication frequency.
Explains how to set the desired frequency and operate in communication mode.
Details the use of 250 memory channels for storing and recalling frequencies.
Explains the reception of 10 VHF weather channels for flight planning.
Instructions on how to adjust frequencies using the keypad or keys.
Steps to enter and store frequencies into memory channels.
Detailed steps to recall memory channels and set nametags.
Instructions for selecting weather channels and configuring weather alerts.
Instructions on how to start and stop scanning for signals.
How to set the PRIORITY-CH frequency for dual watch monitoring.
Instructions on how to set a frequency and activate/stop the dual watch function.
Lists settings available in the COMM setup menu, like EMERGENCY CALL and WEATHER ALERT.
Details settings in the CONFIG menu, such as KEY BEEP, BATTERY SAVE, and BACKLIT.
To Next Page
