Need help?Do you have a question about the Yaesu FTA-850L and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | FTA-850L |
| Category | Transceiver |
| Language | English |
Explains fundamental operations like turning the radio on/off, adjusting frequency, volume, squelch, and transmitting.
Outlines FCC RF exposure compliance requirements for occupational use and safety guidelines.
Guides on configuring and activating key lock, DIAL lock, or all lock to prevent accidental changes.
Step-by-step instructions to reset all settings and memories to factory defaults.
Guides on pairing a Bluetooth headset with the radio for wireless operation.
Covers connecting to paired devices, adjusting volume, and disabling Bluetooth functionality.
Explains hands-free VOX operation and procedures for disconnecting a Bluetooth headset.
Details activating VOX, adjusting gain levels, and setting the delay time for voice-activated transmission.
Explains how the VOR screen displays signals and aids in navigation using OBS and CDI.
Details the ILS screen for localizer and glide slope guidance during airport approaches.
Explains how to set and activate the split operation for simultaneous COM and NAV band use.
Details transmitting during NAV reception and exiting the split mode operation.
Guides on setting the priority channel and activating dual watch to monitor two frequencies.
Details the TOT feature to limit transmission time and conserve battery.
Guides on setting up and activating PTT lock for internal, external, or both PTT switches.
Explains how to access and recall memory channels and groups from the radio's memory bank.
Details how to quickly store current channel information into memory, with optional customization.
Guides on editing stored memory information and deleting entries from the memory book.
Guides on initiating navigation by selecting a destination or route from memory, history, or by entering coordinates.
Details how to select destinations/routes from memory, history, or enter new coordinates to start navigation.
Describes route confirmation screens, waypoint display, and starting navigation to a waypoint or route.
Provides instructions on how to turn the internal GPS unit ON and OFF for position information.
Explains how to display position information in numerical, compass, or GPS status formats.
Details the Location Information screen and GPS Information screen, showing coordinates and satellite data.
Guides on saving current position and using the logger to record location at intervals.
Provides a summary table of all settings within the Memory Book section of the SETUP menu.
Summarizes all configurable options within the COMM Setup section of the SETUP menu.
Summarizes all configurable options within the GPS Setup section of the SETUP menu.
Lists general technical specifications including frequency range, channel spacing, voltage, and current consumption.
Details technical specifications for the transmitter, GPS unit, and Bluetooth module.
Addresses common troubleshooting questions regarding headset adapter cable connections and headset compatibility.
Explains safety marks and symbols, and provides general safety warnings related to product use and potential hazards.
Details safety precautions for battery packs, charging, handling, and general warnings about misuse.
Lists restrictions on use in hazardous environments, cleaning, storage, and operation near other devices.
To Next Page
