Need help?Do you have a question about the Yaesu FT5Dr and is the answer not in the manual?
General| Frequency Range | 144-148 MHz, 430-450 MHz |
|---|---|
| Output Power | 5W/2.5W/1W/0.3W |
| Antenna Impedance | 50 Ohms |
| GPS | Yes |
| Bluetooth | Yes |
| APRS | Yes |
| Modes | FM |
| Weight | 282 g with battery and antenna |
| Receiver Type | Double Conversion Superheterodyne |
Step-by-step guide for powering on, call sign setup, tuning, and basic controls.
Identifies physical buttons, knobs, LEDs, and their functions.
Explains the DANGER, WARNING, and CAUTION marks and their significance.
Lists essential safety instructions regarding hazardous situations and prohibited actions.
Provides further warnings on product usage, electrical safety, and potential hazards.
Explains the IPX7 waterproofing and necessary precautions for maintaining it.
Covers precautions related to product operation, environment, and potential damage.
Addresses safety regarding product handling, vehicle integration, and child safety.
Details charging the battery pack using supplied and optional rapid chargers.
Describes functions, supported cards, and mounting/dismounting procedures for microSD cards.
Provides step-by-step instructions for formatting a microSD memory card for optimal use.
Covers turning the transceiver on/off and the initial call sign input process.
Explains the DG-ID feature for group communication and automatic monitoring.
Details setting DG-ID numbers for communication with all stations or specific group members.
Explains how to set DG-ID numbers for communicating exclusively with specific group members.
Explains automatic repeater shift (ARS) and communicating via repeaters.
Lists the types and quantities of memory channels available on the transceiver.
Step-by-step guide on how to save frequencies and settings into memory channels.
Explains how to register up to 5 frequently used frequencies into the PMG for quick recall.
Guides on registering memory channels into up to 10 CAM groups for activity monitoring.
Explains the procedures for initiating VFO scan and Memory channel scan.
Introduces Bluetooth functionality and the initial pairing process for headsets.
Details enabling VOX for hands-free transmission via Bluetooth headset.
Covers enabling, disabling, and configuring VOX gain levels for automatic transmission.
Explains how to adjust the delay time for returning to reception after speech ceases.
Explains the voice file format, naming convention, and necessary setup for recording.
Guides on starting, stopping, and pausing the recording of received audio.
Instructions for using the optional camera microphone to take pictures.
Explains the WIRES-X system for internet-based radio communication and data exchange.
Describes how APRS uses GPS data to transmit and receive location information and messages.
Provides instructions on how to access and navigate through the transceiver's setup menus.
Step-by-step guide to reset the transceiver to factory default settings, including memory.
To Next Page
