Need help?Do you have a question about the Yaesu FT3DE and is the answer not in the manual?
General| Frequency Range | 144-148 MHz, 430-450 MHz |
|---|---|
| GPS | Yes |
| Bluetooth | Yes |
| Waterproof Rating | IP54 |
| Memory Channels | 1000 |
| Modulation | FM |
| Display | color TFT |
| Battery | 2000 mAh Li-ion |
| Battery Life | Approx. 12 hours |
| Operating Modes | VFO, Memory |
Steps to turn on the transceiver.
Process for entering the call sign upon first use.
Procedure for transmitting and receiving signals.
Information on setting up the Bluetooth function.
Identifies and describes physical controls and connections like PTT, DIAL knob, and jacks.
Explains icons and indicators shown on the status bar.
Visualizes signal strengths across channels.
Accesses various configuration settings.
Monitors stations within communication range using GM function.
Explains danger, warning, caution symbols and prohibition/requirement symbols.
Critical safety warnings regarding usage locations and medical devices.
Lists critical warnings about product misuse and potential hazards.
Important cautions regarding handling, environment, and usage.
Instructions for attaching the antenna.
Steps for installing and securing the battery pack.
Procedure for charging via the standard battery charger.
Steps to insert and remove the memory card.
Detailed steps to power on and off the transceiver.
Guide to entering the call sign upon first use.
Fine-tuning the squelch level for clear reception.
Methods for setting a frequency using DIAL or numeric keys.
Using AMS or fixing transmit mode.
Manually selecting communication modes like V/D, VW, FM, AM.
Steps for transmitting audio and indicator lights.
Adjusting the output power for transmission.
Securing controls to prevent accidental changes.
Explains the DG-ID feature for group communication.
Steps to set DG-ID for communicating with specific members.
Example of setting DG-ID for targeted communication.
Step-by-step guide to saving frequencies and settings to memory.
How to access and select saved memory channels.
Scanning through VFO frequencies to detect signals.
Scanning through programmed memory channels.
Setting how the transceiver behaves when a signal is detected during scan.
Overview of Bluetooth functionality for hands-free use.
Steps to pair a Bluetooth headset with the transceiver.
Using VOX for hands-free transmission with a headset.
Procedures for connecting to different Bluetooth devices.
Configuring the VOX (Voice Operated Transmit) function.
Visualizing signal activity across channels.
Recording received audio to microSD card.
Steps to start and stop recording received audio.
Configuring bands to record and include transmit audio.
Detailed steps for capturing images with the camera microphone.
Using GPS for position reporting and data transmission.
Using the GPS receiver for position and time.
General procedure for navigating and using Set Mode.
Settings related to transmit and receive operations.
Settings for microphone, mute, and recording.
Various configuration settings for the transceiver.
Configuring VOX settings.
Preventing transmission on a busy channel.
Saving and loading transceiver settings to/from microSD.
Saving and loading memory channels to/from microSD.
Formatting a new microSD memory card.
Making Bluetooth settings and connecting headsets.
Restoring all transceiver settings to factory defaults.
Resetting only Set Mode parameters to defaults.
To Next Page
